Huawei

MA 5603T

Huawei SmartAX MA5603T multi-service access module which can be used as the medium-capacity gpon olt, ip deslam and msan.
  • جهت خرید کالا با واحد فروش شرکت به شماره 41335 021 تماس حاصل فرمائید.
  • کلیه تجهیزات Active شامل گارانتی طلایی و یکساله "شبکه تکوین اندیشه برتر" می باشند.
  • ارسال کالا در تهران با پیک و در سایر شهرستان ها با پست انجام می شود.
  • تجهیزات سازگار با این کالا را در قسمت "تجهیزات مرتبط" مشاهده کنید.

Appearance

The MA5603T has a fan tray at the left. The service subrack is installed in the cabinet through the mounting brackets.

Figure 1 Appearance of the MA5603T service subrack(xDSL) 
Figure 2 Appearance of the MA5603T service subrack(GPON) 

Physical Specifications

This topic provides the dimensions, weight, and power consumption of the MA5603T service subrack.

Dimensions and Weight

Table 1 Dimensions and weight of the MA5603T

Item

Specification

Dimensions (W x D x H, excluding mounting brackets)

442.00 mm x 283.20 mm x 263.90 mm

Dimensions (W x D x H, including mounting brackets of 19-inch standard)

482.60 mm x 283.20 mm x 263.90 mm

Dimensions (W x D x H, including mounting brackets of ETSI standard)

535.00 mm x 283.20 mm x 263.90 mm

Weight (empty service subrack)

7.00 kg

Configuration

This topic provides the configuration of the boards in the MA5603T service subrack, and lists the type of the boards.

H801MABO and H802MABO are the backplanes supported by the MA5603T. H801MABO does not support the Vectoring feature, and H802MABO supports the Vectoring feature.

Figure 1 Configuration of boards in the MA5603T service subrack 

Table 1 lists the configuration of boards in the MA5603T service subrack.

 

Slot Type

Slot

Supported Board

Remarks

Control board (SCU) slot

6,7

Control board

Two slots must be configured with the same control board. You are advised to configure 2 control boards working in active/standby mode.

Uplink interface board (GIU) slot

8,9

Uplink interface board

Mixed configuration of upstream interface boards is supported; however, it is recommended to use the same upstream interface board in the configuration.

Filler Panel

9

Reserved

-

Power board slot

10,11

Power board

It is recommended to configure the same power board in the two slots.

Universal interface board (GPIO) slot

12

  • Universal interface board

  • Vectoring processing board

-

Service board slot

0-5

  • Service board

    • SPU board

    • Ethernet service access board

    • TDM service processing board

    • GPON service board

    • 10G GPON service board

    • P2P interface board

    • ATM interface board

    • DSL&POTS Combo board

    • Voice board

    • ADSL2 service board

    • VDSL2 service board

    • SHDSL service board

  • SPL board

    • ADSL2 SPL board

    • VDSL2 SPL board

  • Extension board

Power Supply:

Table 2 Power specifications of the MA5603T

Item

Specification

Power supply mode

DC (dual power for backup)

Rated voltage

-48 V / -60 V

Working voltage range

-38.4 V to -72 V

Maximum input current

20 A

MA5603T Fan Tray(FMCA)

A fan tray functions heat dissipation, monitoring, and fan speed adjustment, which ensures that the device works at a stable temperature.

Appearance

Six fans are configured in the fan tray (FMCA) of the MA5603T.

Specification

Item

Specification

Dimensions (W x D x H)

53.0 mm x 272.5 mm x 245.7 mm

Weight

2.0 kg

Power consumption (including FMCA board)

  • Static: 30 W

  • Maximum: 72 W


Function:

The functions of the fan tray are as follows:

  • Heat dissipation

    The fan tray is at the left of the service subrack and blows air for heat dissipation of the service subrack. The cool air flows to the subrack from the left of the subrack and then is exhausted from the right of the subrack after passing the boards.

  • Monitoring

    The fan tray is configured with a fan monitoring board. The fan monitoring board transmits speed adjustment signals to the fan tray, collects the rotating speed signals of the fans, and reports the rotating speed signals to the control board.

  • Speed adjustment

    The rotating speed of the fans can be adjusted according to the detected temperature automatically or be adjusted by software manually.

Power Consumption

Table 3 Power consumption of the MA5603T service subrack (Unit: W)

Typical Configuration

Static power consumption

Maximum power consumption

Typical power consumption

Board configuration

ADSL2

189.84

606.55

398.195

H802SCUN*2 H801X2CS*2 H801CITD H801PRTE*2 H801FCBI H805ADPD*6

VDSL2

267.84

702.55

485.195

H801SCUN*2 H801X2CS*2 H801CITD H801PRTE*2 H801FCBI H80BVDPM(17a)*6

POTS

213.84

396.55

305.195

H801SCUN*2 H801X2CS*2 H801CITD H801PRTE*2 H801FCBI H808ASPB*6

P2P

537.84

810.55

674.195

H802SCUN*2 H801X2CS*2 H801CITD H801PRTE*2 H801FCBI H802OPGD*6

GPON (H805GPBD)

375.84

504.55

440.195

H802SCUN*2 H801X2CS*2 H801CITD H801PRTE*2 H801FCBI H805GPBD*6

GPON (H806GPBH)

309.84

486.55

398.195

H802SCUN*2 H801X2CS*2 H801CITD H801PRTE*2 H801FCBI H806GPBH*6

GPON (H802SCUN H805GPFD)

273.84

510.55

392.195

H802SCUN*2 H801X2CS*2 H801CITD H801PRTE*2 H801FCBI H805GPFD*6

GPON (H801SCUH H805GPFD)

391.84

678.55

535.195

H801SCUH*2 H801X2CS*2 H801CITD H801PRTE*2 H801FCBI H805GPFD*6